MakerSlide Update

Things are moving, but slower than I would like.  A new die is being made, and should be done next week.  After that, it works like this:

  • Extrusion: a billet of aluminium alloy (a thick, solid cylinder) is heated and pushed through the die by a powerful hydraulic press.  The profile emerges from the die, much like macaroni from a pasta-making machine.
  • Cut: the resulting raw profile is cut in long lengths (three to six meters).
  • Anodizing: the long lengths are submerged in a solution of sulfuric acid and a current is passed through the parts.  This creates a thin, clear coat of aluminium oxide on the surface of the profile.  Another step is required to seal the pores in this coating, which improves corrosion resistance.  The thickness of the coat on standard MakerSlide gives it good corrosion resistance, and some resistance to abrasion: perfect for acetal (Delrin) wheels, but not good for steel wheels.  To withstand those, a much ticker and denser layer of oxide is needed.  Because the oxide is an insulator, once the layer grows thick enough it prevents current from flowing through the part and stops more oxide from being created.  To work around this, and to create a much tougher layer, hard coat anodizing is done slowly, in a different concentration of sulfuric acid, at temperatures near freezing.  The refrigerated tanks and the much longer time mean the process is expensive.  In our case, it costs more than the extruded aluminium itself.
  • Cut to size: the long lengths are cut to the sizes we need by a CNC saw.
  • Packaging: parts are wrapped in plastic tubing.
  • Shipping: the wrapped lengths are placed on pallets (with more packaging to protect them) and transported to us by truck.

The current estimate of when this fabled truck will arrive and deposit its load in our garage is end of February.

2 thoughts on “MakerSlide Update

    • I have made the decision, about six months ago, that, in the interest of my sanity, I would no longer accept pre-orders. It simplifies accounting, and removes a great source of stress.

      To customers, it’s only a problem if I don’t have enough stock — but with the new supplier, there will be a fairly large buffer of uncut profile in their warehouse at all times, so I can get more cut lengths, as needed, in days rather than months (and the lead time for replenishing their stock is about two weeks, much better than the turnaround time at my previous supplier).

      Still, until I hold the metal in my hands and I am happy with the quality, I can not take orders. I hope you understand.

Leave a Reply